or data recovery call: 855.366.4232 or request your service here:
r-studio data recovery software:
tools we use:
This hard drive was not showing any data when it was plugged in. We suspect that the unit started to have minor signs of firmware problems that are ever so common among WD hard drives. Just like with any Western Digital hard drive, our lab takes several preparation actions to ensure safe and trouble-free imaging. First, we always use compatible SATA boards for all native USB interface drives. Second, firmware gets prepped for imaging with PC-3000. Since the boot sector was gone, we had to image this drive fully, and then run full partition analysis to rebuild a file structure back to original. After these steps, hard drive's was fully restored.
if you want to ship your failed device to us for data recovery and free evaluation, simply fill out this form:
and send your drive boxed with bubble wrap to this address:
HDD Recovery Services
391 Bank St, Suite 201
Ottawa, ON
K2P 1Y3
Canada
Updated 2019 my gear for soldering:
Green inspection light
Platter extractor:
Momentary foot pedal switch
Vacuum pump
Cleanroom wipes:
Programmer
Quick pogo pin adapter for eepROM
Microscope:
Vacuum chip pickup tool:
Multimeter:
Microscope camera 21mp 60fps 1080P:
JBC precision soldering iron and tweezers:
Hot air station:
Infrared preheater:
Flux dispenser:
BEST Flux:
Wick:
Solder:
Solder paste for BGA reballing:
NAND BGA rebelling stencil
Gloves:
Fume Extractor (mine is no longer available but this is the new version of the same unit) :
Gear for filming:
small camera:
big camera:
Lens on big camera:
this video:

0 Comments