Today, We put TAC Systems Power Quartz Plus through the Apex Detail Review Process!! This is an easy to use all around coating, providing durability, slickness, and self cleaning hydrophobic properties. Quartz power plus is better suited for application in extreme conditions (temp & humidity) compared to shine 70%. TAC Systems Power Plus....
Use code GLOSS2020 for 10% off!!
Warnings: Always wear respirator & gloves. Ensure application area is free of loose contamination.
Tips / Alternate Uses: High spots are visible for 20-30 minutes. If high spots are found within an hour of wipe off, they can be reactivated and removed with with Sparkle Plus on a new MF applicator.
Directions: In a well lit, temperature controlled 50°F-85°F (10°C-30°C), & contamination free environment. Suggested section size: 1 panel at a time. Applicator Limit – Hood Size, spread evenly over the section, allow 1-3 minutes dwell time, then wipe off with new MF non linting towel. Applicator Limit 1/2 Hood Size area – then change.
Max Efficiency (not required): Cure Power Plus with IR lamps at 165°F for 5-8 min per panel.
For Optimal Results: First thoroughly wash vehicle with Mystic Bubble then remove all embedded iron deposits from vehicle paint pores and surfaces using Iron Zero. Next, polish vehicle surfaces to highest level. After polishing, use Oil Zero to remove all polish oils from surfaces to ensure optimal bonding and durability for the coating application.
apexautodetail.com
#apexautodetail #TACsystems #ceramiccoatings
0 Comments